Mk52 Bed Soldered cable cover

Simple, low profile cover (sits lower than an M3 screw aligning the build plate) to allow the wires come from underneath, to be soldered to the bed, then routed between the bed and the carrier to a cable chain. Suits flexible silicone 16AWG cable. Tight tolerance to the power section of the PCB in order to try and strain relief the wires onto the bed, you may need to file the inside of the top/bottom cover to get a nice snap fit.

Recommend printing in PETG at least, but preferably ABS due to the temperatures involved.

Assembles with an M3 countersunk screw and a Nylock nut

Designed this as part of my remix of the awesome Reduplicator project by Omnomnomagon. Will upload my remixes soon.