Thingiverse
MKS Gen 1.4 Case
par KernelSanders_
2
Téléchargements
1
Likes
0
Makes
A bare-bones design for a MKS GEN 1.4 case. The 6 side plates as well as the fans are glued together. Each plate is 4mm thick, so depending on your wall count and nozzle, the part may not need infill
The case has two slots for a 4x4xX fan. I used one 4x4x1 and one 4x4x2 fan for my printer. For reference, 4x4x1 is the fan that comes on your hotend.
You will have to break and reapply glue every time you need to access the board, so make sure you get it right!
The case has two slots for a 4x4xX fan. I used one 4x4x1 and one 4x4x2 fan for my printer. For reference, 4x4x1 is the fan that comes on your hotend.
You will have to break and reapply glue every time you need to access the board, so make sure you get it right!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !