Thingiverse
MKS GEN case
par AnthonyQ
218
Téléchargements
156
Likes
1
Makes
Case for MKS GEN printer controller board. The cover has provision for a 40mm fan needed for cooling. The two spigots on the end are suitable for 10mm OD spiral tubing. The cover is attached with 3mm screws into nuts that are held captive in printed slots. It is based on a remix of this customizer. http://www.thingiverse.com/thing:155001
24th April - added mks_gen_case_v4 the difference is a slot between the two spigots that will allow the connectors to fit through during assembly.
21th May - added mks_gen_case_lid_v3, position of fan moved so the screws don't rest on the ribbon connectors. 3.5mm hole is for the fan power cable access.
24th April - added mks_gen_case_v4 the difference is a slot between the two spigots that will allow the connectors to fit through during assembly.
21th May - added mks_gen_case_lid_v3, position of fan moved so the screws don't rest on the ribbon connectors. 3.5mm hole is for the fan power cable access.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !