MakerWorld
Hueforge & Lithophane
Voir le modèle
MMA Rooster- Hueforge
6
Téléchargements
12
Likes
2
Makes
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. The Model is 165x220mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Silver Transmission Distance: 0.5PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 4 unique filaments (May use other colors than listed) Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to RedAt layer #17 (1.44mm) swap to SilverAt layer #21 (1.76mm) swap to Jade White for the rest.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
