Sailor Moon bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 67.75x200mm in size, for A1mini you can scale it, but remember to maintain Y at 100%.You may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.1mm and the Actual Depth is 2.2mm Filaments Used:    Ziro Macaron Rainbow Transmission Distance: 2.5    PLA Matte BambuLab Ivory White Transmission Distance: 3This print uses 2 unique filaments Swap Instructions:    Start with Ziro Ma