Mo Salah Hueforge

This model was printed using AMS with 6 colors, if you want to reduce it to 4, you might elimenate Blue and Plum.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:PLA+ BambuLab Black Transmission Distance: 0.3PLA+ BambuLab Matte Ice Blue Transmission Distance: 3.5PLA+ Bambulab Yellow Transmission Distance: 3.8PLA+ BambuLab Matte Plum Transmission Distance: 1.6PLA+ BambuLab Red Transmission Distance: 4PLA+ BambuLab Basic Jade White Transmission Distance: 5swap Instructions: Start with BambuLab Black At layer #12 (1.04mm) swap to BambuLab Matte Ice Blue At layer #17 (1.44mm) swap to Bambulab Yellow At layer #21 (1.76mm) swap to BambuLab Matte Plum At layer #27 (2.24mm) swap to Bambulab Red At layer #32 (2.64mm) swap to Bambulab Yellow At layer #40 (3.28mm) swap to Bambulab Jade White