Mob 100%

This is Mob (Shigeo Kageyama) from mob psycho 100. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 160x200mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.08mm Filaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #482960 PLA BambuLab Basic Indigo Purple Transmission Distance: 1.1 #e2dedb PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Indigo Purple At layer #19 (1.6mm) swap to White for the rest. Those are just the filaments i had on hand. use whatever you want. You can replace the purple with just about any color and it should still look good. To scale it, change the x and y dimensions, do not change the z dimension.