Mobula 8 case

This is a case for the Mobula 8 FPV drone. Mine is the Walksnail version, but I presume that it'll fit any version of the quad. There is room in the side compartments for 8 batteries.

To complete, you'll need four 5x2mm magnets and some straight wire for the hinge pin. I used 1.25mm wire because I had it on hand, but you can use whatever you have, drill out the holes to match, and glue in one end of the hinge pin.


Edit 9/8/24: Space was added to allow an O3 camera Mobula 8 to fit.