Mockingbird Hueforge 200x200

This model is a 200x200mm of a Mockingbird on a tree branch. This was completed using 4 colours, black, muted blue, cream and white. I use HRM (Hight Range Modifiers) which basically is the 4 first layers are printed in .16mm then the others are in .08 To achieve the result expected, make your filament changes based on the hight in mm instead of layers. Print Instructions:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.64mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 1mmThe Max Depth is 3mm and the Actual Depth is 3mm Filaments Used: PLA Generic Black Transmission Distance: 0.2 PLA PolyTerra Muted Blue Transmission Distance: 0.3 PLA PolyLite Cream Transmission Distance: 2 PLA PolyLite Pro Cold White Transmission Distance: 0.5 This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (1.68mm) swap to Muted Blue At layer #18 (2mm) swap to Cream At layer #24 (2.48mm) swap to Cold White for t