Model Rocket - The Centurion

This is intended for experienced model rocket builders - sorry no detailed instructions at this time. If unsure learn first by building other store bought small model rockets to understand the concepts before attempting to build this model.

You may need to print in a different orientation for best results and use of supports may be also needed especially on the Fin body section.

Only fly strictly following your country's safety regulations for model rocketry.

Recommended motor is an Estes D12-5. Use 5 minute epoxy or equivalent to bond pieces together as applicable. Note this model also has a small payload section to insert something like a miniature altimeter or GPS tracker or additional nose weight. You will need a small plastic parachute and elastic shock cord and flame retardant wadding to protect the chute. Use of PLA+ or PETG recommended for this print. PETG is best for the motor mount retainer tube, motor adapters and motor mount retainer.