Modern Christmas Tree (tealight compatible)

Modern christmas tree ornaments for vase mode printing. Large tree is 180mm tall and small tree 140mm and both have a 40mm opening for a tea light on the bottom. Designed for vasemode printing. Profiles are tuned to get a good print quality with variable layer heights. When using translucent filament you can use an electronic tealight to light up the tree. Model is compatible with Bambulab LED Flame Tea Light Candle Set. When slicing yourself and using larger layer heights there may be gaps in the print because of the steep curvature on the model. Thus it is recommended to use 0.16 mm overall layer height with lower variable layer heights on the tip and the top curvatures of each section of the tree. If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign For one time support you can also buy me a coffe here: https://buymeacoffee.com/sabredesignBoost MeCheck out more of my designs below and on my profile:<figur