Slicer Discord
Modern Desk Light – 3D printable model from MakerWorld MakerWorld
Office

Modern Desk Light

by giaimef · Office
1.2k Downloads
523 Likes
529 Makes
Go to Model
This modern lamp allows you to illuminate your desks with two configurations: a frame to accommodate an LED strip or a phone holder.There are multiple adjustment points:Easy attachment to the desk using a clamp with adjusting screws;Ability to rotate the entire structure by 360 degrees;Each arm allows rotation from -50° to +50° approximately;The LED frame adjustment arm can also rotate by 360 degrees;Hooks are available to secure the LED power cable or the phone charger cable (max. Ø 4 mm);Please note, two M3 screws (length up to 8 mm) are required to screw the LED frame cover. The hole that allows the power cable to enter the frame is 4.5 mm. If you are not able to solder you can use a led strip with the connectors already prepared, but there is a risk that you will not be able to get the cable through the hole. Ver. 1.01: Added a new optional version of the screws that allows them to be tightened using a 24 mm spanner.Ver. 1.02: Modified clamp screw (Thanks to @miao_o) I've print
Category
Office
Source
MakerWorld
Published
Updated
What you need to print this: Advanced Low confidence
Why?
large print · significant post-processing
Hardware needed
Supports 1/3
Assembly 2/3
Settings 1/3
Bed size 2/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
200 mm (Large)
Post-processing
Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
Same designer, more platforms

giaimef also publishes on

34 additional models across 1 more platforms

Verified by matching model titles across platforms.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection