Modern Led Lamp

This simple LED light is designed to be run with WLED on an esp32 or esp8266. I used WS2812B lights (60 LEDS per 3.2ft version). Assembly is pretty straightforward. Assembly:The first thing is to print all the parts. The outer part piece needs to be printed in multicolor or just white for the lights to show.Step One: Solder two strands of 28 LEDs together (56 total). Remove the tape from the LEDs and attach them to the outside of the piece shown above. Make sure that all the LEDs line up with the holes on the outer part. You will have to fold the LED strip on the corners to make sure they align (shown in the second picture). Then put the core inside the outer part and route the light wires through the bottom hole.Step Two: Glue the core cover to the core and outer part.Step Three: Glue the base to the outer part using the pegs for guidance.Step Four: There are screw holes to securely lock in esp8266 boards, but if you are using an esp 32, just glue it to the cover. Glue or snap the bas