Modern wall hook in two Sizes

These wall-mounted hooks are designed to be both functional and visually appealing. Available in two sizes, they can be easily installed and used in various settings to hang lightweight items.Large hook dimensions: 50 mm (height) × 20 mm (width) × 14 mm (depth)Small hook dimensions: 44 mm (height) × 14 mm (width) × 14 mm (depth)Screw hole size: Designed for 3.5 mm wood screwsHow to UseFirst, screw the base part to the wall using two 3.5 mm wood screws.Before assembly, you can apply a small amount of lubricant (e.g., machine oil, WD-40, PTFE spray) to ease insertionThen, press the hook part onto the mounted base from the top.If it’s too tight to fit, carefully trim about 0.1 mm from each side of the wall-mounted part using a hobby knife. (see last pic)I printed from 5 different filament types; one was very tight and required slight adjustment. Boost Me Resizing is not recommended. !!! Make sure the print speed and temperature and cooling are set correctly for your printer and the filame