Modified PiFinder Straight-Thru Case

These are all the items to 3D print if you are building a PiFinder. Assembly of this case requires screws. I designed this around 2mm screws. The holes are designed around 2mm heated inserts, the kind you use a soldering iron.

I plan on using my PiFinder on my grab-n-go set up which can include a Celestron C8 telescope or a C90 telescopes mounted on top of a manual alt-arm SVBony SV225 mount. Additionally, I'll be using the PiFinder with a set of Celestron SkyMaster 20x80mm binoculars mounted atop an Orion Paragon Parallelogram mount.

I looked at lots of different cases for a PiFinder that others had created but didn't find any one version that I wanted to use. So I pulled in lots of different designs to create this one. Also, I built my PiFinder to use the PiSugar battery. Therefore I enlarged one of the openings/ports from the borrowed designes so it was easier to turn the PiFinder switch on as well as connect to the micro-HDMI Port. I also created plugs that could fill/cov