Thingiverse
*Modified - XBOX HOTAS joystick
von Lukemeier12
686
Downloads
596
Likes
3
Makes
* Updated the .3MF file to have the 2 correct controller connection pieces 30 Sep 2020
* Updated the "Throttle_shaft-modified.stl" file and the "3MF" file. 29 Sep 2020
* Updated the "Joystick_thumbstick_collar-modified" file, and the "3MF" file. 28 Sep 2020
Every eyelet has been slightly increased to allow the ball joints to snap in nicely. The hinge tolerances have also been increased (may need to nudge with hammer to inset) but they move nicely after a couple break-in moves. The throttle rod was shortened slightly to fix response issues. The controller is mounted to a piece of wood. To easily get the controller in and out the adapters have been modified to reduce their footprint. All credit to the original designer. I hope this helps others out.
* Updated the "Throttle_shaft-modified.stl" file and the "3MF" file. 29 Sep 2020
* Updated the "Joystick_thumbstick_collar-modified" file, and the "3MF" file. 28 Sep 2020
Every eyelet has been slightly increased to allow the ball joints to snap in nicely. The hinge tolerances have also been increased (may need to nudge with hammer to inset) but they move nicely after a couple break-in moves. The throttle rod was shortened slightly to fix response issues. The controller is mounted to a piece of wood. To easily get the controller in and out the adapters have been modified to reduce their footprint. All credit to the original designer. I hope this helps others out.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!