modular Cable Guide for Desk

Modular Cable Guide for DesksAvailable in three different lengths (100, 140, 180) and two different styles:standard Mk2 with cable pass-through Measurements for the cable pass-though (same for all sizes): AssemblyMount them with 4x40mm wood screws to the underside of your table.1 screw per module is enough*, only the last piece in the chain needs 2 screws.*) If you respect the correct assembly direction (see picture below) the following piece supports the previous one. PrintingPrint in a 45° angle for better stability of the prongs.Be aware, that the prongs have to be bent when thicker* cables are installed.*) The clearance between the prongs and the underside of the table is 9mm shy. While PLA works fine for me, you may consider using some filament with better flexibility.