Thingiverse

Modular drawer for electronic components (Vase mode) – Bild 1

Modular drawer for electronic components (Vase mode) – Bild 2

Modular drawer for electronic components (Vase mode)

by Mordemot

4.8k Downloads

3.5k Likes

5 Makes

Go to Model

Other desings similar to this were not perfect for me, so I designed my own version. It was created to be a fast print in vase mode so when u have a new component you can quickly print drawer for it.

I use a 0.6mm nozzle and high layer height (0.36mm) so a new "cell" is printed under 1.5h.

Make sure you are slicing in vase mode, otherwise slicer will show you full block with infill not the correct drawer.

Update:
Fixed models for proper slicing

You can also find this design on printables:
https://www.printables.com/pl/model/394348-modular-drawer-for-electronic-components-vase-mode

DIY electronics drawer drawers electronics box fast print resistor box vase mode

Source

Thingiverse

What you need to print this: Advanced Medium confidence

Why?

no supports · large print

Support-free

Supports 0/3

Assembly 2/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

200 mm (Large)

Est. print time

1.5 h

Post-processing

Gluing

Software

Cura, PrusaSlicer, or similar

Same designer, more platforms

Mordemot also publishes on

13 additional models across 1 more platforms

Printables

13 models

♥ 900 ↓ 3,628 ⚒ 33

Frequently Asked Questions

Which 3D printer is suitable for Modular drawer for electronic components (Vase mode)?

Any FDM printer should handle Modular drawer for electronic components (Vase mode) just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Modular drawer for electronic components (Vase mode) need supports when printing?

No supports needed for Modular drawer for electronic components (Vase mode) — it's designed to print clean off the bed.

How long does it take to print Modular drawer for electronic components (Vase mode)?

According to the design notes, Modular drawer for electronic components (Vase mode) takes approximately 1.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Modular drawer for electronic components (Vase mode) available in?

Modular drawer for electronic components (Vase mode) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Modular drawer for electronic components (Vase mode) free to download?

Yes, Modular drawer for electronic components (Vase mode) is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Modular drawer for electronic components (Vase mode)

Similar Models

Add to Collection