Modular DS Stand

2 Part modular stand designed for the OGDS. Primarily designed for shiny hunting purposes but could be used as a display stand. Consists of 2 parts, the "riser" and the "plate". Each riser connects to the back of the plate with two M3 screws and bolts, and riser requires a plate on top which connects with four M3 screws and bolts. The risers each connect to one another by using two M3 screws and bolts, and each plate can connect together with one M3 screw and bolt for added stability if the stand is going to be moved around. Cut out holes on the right are for standard 3.5mm audio cables for recording purposes. Back cut outs are compatible with Gonjona controller mod and Loopy capture mods.

I may make alternate versions in the future, however currently working on other projects first.

Recommended Print Profile / Settings:
-0.4mm Nozzle
-Enable Supports
-0.2mm Initial Layer Height
-0.24mm Layer Height

These are the settings I used to print my own, you can up the layer height and nozz