Modular Dust Collector - Version 0.1

## Description

Hmm... you know so sawdust doesn't clog up the wet/dry vac filter. Parts are attached using threads with an ISO Metric profile of M150x2 (lid), M68x2 (end of the cone) or M48x2 (outtake and intake valve). The Cone and Drum are 150 mm diameter. When assembled it is approx. 300 mm in height. Print the parts you need, and see what works best for your wet/dry vac, or create your own to fit the threads.

** This is kind of a work in progress - it works great, but not sure if the intake and outtake valves will work for every hose out of the box. I have a Ridgid Wet/Dry vac with a 1-7/8 house - the fit is pretty snug.

## Features

- Threaded parts (if there is a part you don't like you can make your own and attach it)
- Minimal Supports - Only needed for printing the base of the drum for the intake valve
- The intake valve should fit a 1-7/8 in. hose or 1-1/4 hose
- The outtake valve should fit a 1-7/8 in. hose (threaded so you can print your own adapter if neede