Thingiverse
Modular Filament Spool Rack
di mmecco
19
Download
10
Likes
0
Makes
Who doesn't have an empty closet that could be used to store all those filament spools that you hoarded since you got into 3d printing? Well, I had one...
The print is pretty straight forward as long as you have a big print surface. I Uploaded the Step file so you can cut it if you need to.
The screws I used were 3.5x20mm wood screws, anything similar to that should work
I bought the rods from a hardware store. Those are 17.5mm diameter aprox ( IWhen I bought them they were supposed to be 18mm diameter, but you know...)
Let me know if you need more information and don't forget to post your prints and remixes!!
The print is pretty straight forward as long as you have a big print surface. I Uploaded the Step file so you can cut it if you need to.
The screws I used were 3.5x20mm wood screws, anything similar to that should work
I bought the rods from a hardware store. Those are 17.5mm diameter aprox ( IWhen I bought them they were supposed to be 18mm diameter, but you know...)
Let me know if you need more information and don't forget to post your prints and remixes!!
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
