Thingiverse
Modular Hex-Shelf - Remix
door dnsblm
153
Downloads
136
Likes
1
Makes
I like the modular Hex-Shelf by JohnOldman, but i wanted to make it easier to use. I don't wanted to print all out of PETG. I wanted to combine it with wood. So i searched for some wooden plates on Amazon and changed some things on the hex adapter.
You can screw the Adapter on your wall or just use it for a standing shelf.
Insert the Plates to the Adapter and press the cap on it to fix the plates.
I also attached a little help for the first hex system, to bring it easier to your wall.
What you need:
https://www.amazon.de/gp/product/B081222CJ2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Needed dimensions of the wooden Plates: 4,5-4,6mm thickness, ~76mm depth and width
*UPDATE 25.1.2021: Updated the Template to less Material Design. Also added a Template for easier adding new HEX Cubes.
*TO MAKE SURE: You can add smaller Plates then 76x76mm, but you should aways have the depth of ~76mm and just change the width to make it fit perfect.
You can screw the Adapter on your wall or just use it for a standing shelf.
Insert the Plates to the Adapter and press the cap on it to fix the plates.
I also attached a little help for the first hex system, to bring it easier to your wall.
What you need:
https://www.amazon.de/gp/product/B081222CJ2/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
Needed dimensions of the wooden Plates: 4,5-4,6mm thickness, ~76mm depth and width
*UPDATE 25.1.2021: Updated the Template to less Material Design. Also added a Template for easier adding new HEX Cubes.
*TO MAKE SURE: You can add smaller Plates then 76x76mm, but you should aways have the depth of ~76mm and just change the width to make it fit perfect.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
