Thingiverse
Modular honeycomb wine rack
por ILikon
103
Descargas
238
Likes
1
Makes
A modular wine rack to fit your needs of wine storage
Its easy to print and to assemble. You can print any combination of rings and half rings. Use the H columns to join rings side by side and use the half columns for the outer limits.
I suggest you print a test first to check the tolerances, you want it to be tight so depending on the printer you might need to tweak the flow or expand/contract horizontal values.
The rings have a 90 mm diameter which should be enough for most kind of wine bottles
I designed and printed in PLA around 2 years ago and everything is still holding strong, only now remembered to upload it.
Enjoy
Its easy to print and to assemble. You can print any combination of rings and half rings. Use the H columns to join rings side by side and use the half columns for the outer limits.
I suggest you print a test first to check the tolerances, you want it to be tight so depending on the printer you might need to tweak the flow or expand/contract horizontal values.
The rings have a 90 mm diameter which should be enough for most kind of wine bottles
I designed and printed in PLA around 2 years ago and everything is still holding strong, only now remembered to upload it.
Enjoy
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!