Slicer Discord
Modular LED Corner Lamp: Drip Light (Alpha) – 3D-printbaar model van Thingiverse Thingiverse

Modular LED Corner Lamp: Drip Light (Alpha)

door MrCatNaps
74 Downloads
57 Likes
1 Makes
Model downloaden
Drop Light (Alpha)

Video: https://www.youtube.com/watch?v=TeW-jQ5rjn8
Instagram: https://www.instagram.com/mr.catnaps/

Build:
1) Print all the 'led_corner_rail' that you need minus one.
2) Print 1 'led_corner_rail_end' for the top.
3) Print as many 'led_corner_insert' as total rails.
4) Print the base, 'led_corner_rail_mount'.
5) Connect the rails with an insert, I used some super glue here. Keep in mind that one end of the rail has a wall and the other doesn't. Always set the insert into the side with the wall and press it into the side without the wall.
6) Measure and cut two lengths of LED strips.
7) Connect the strip with some wires that will fit in the cut out in 'led_corner_rail_end'.
Hint: Making the wires small, medium, and large helps with the angle.
8) Set the full LED rail into the base.
9) Wire it to a arduino, this design is for a D1 Mini NodeMcu.
10) Throw some code on the arduino, https://github.com/midorineko/CompleteLEDs/blob/master/corner_leds.
11
Bron
Thingiverse
Wat je nodig hebt om te printen: Gevorderd Lage betrouwbaarheid
Waarom?
grote print
Supports 1/3
Montage 2/3
Instellingen 1/3
Bedgrootte 2/3
Nabewerking 1/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
Min. bedgrootte
200 mm (Groot)
Nabewerking
Lijmen
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie