Thingiverse
Modular Magnetic Mini Camera Mount
di RJGII
53
Download
46
Likes
0
Makes
This case and the brackets were created to meet my needs for a small wide-angle camera for use with OctoPrinti/OctoPi.
The camera used is this one:
[https://www.amazon.com/gp/product/B00LQ854AG/](https://www.amazon.com/gp/product/B00LQ854AG/)
Thingiverse seems to be changing that link, search for "ELP-USBFHD01M 180 degree fisheye"
I had to modify octopi.txt to add the correct camera options; this is what I used:
> camera_usb_options="-r HD -f 60"
The knobs, arms, and printable screws/nuts can be found here and is the project these items are remixed from:
[https://www.thingiverse.com/thing:2194278](https://www.thingiverse.com/thing:2194278)
For the magnetic mounts, you must pause the print before the slots are closed off, insert the magnets, then resume the print. I use Prusa's ColorPrint site to insert an M600 command into the gcode for the appropriate layer. It should work for any firmware that understands the command and can be found here:
[https://www.prusaprinters
The camera used is this one:
[https://www.amazon.com/gp/product/B00LQ854AG/](https://www.amazon.com/gp/product/B00LQ854AG/)
Thingiverse seems to be changing that link, search for "ELP-USBFHD01M 180 degree fisheye"
I had to modify octopi.txt to add the correct camera options; this is what I used:
> camera_usb_options="-r HD -f 60"
The knobs, arms, and printable screws/nuts can be found here and is the project these items are remixed from:
[https://www.thingiverse.com/thing:2194278](https://www.thingiverse.com/thing:2194278)
For the magnetic mounts, you must pause the print before the slots are closed off, insert the magnets, then resume the print. I use Prusa's ColorPrint site to insert an M600 command into the gcode for the appropriate layer. It should work for any firmware that understands the command and can be found here:
[https://www.prusaprinters
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
