Modular Medium BullAnt Nest

==Modular Medium BullAnt Nest== Designed this as a way to combat the growth of your Myrmecia Colony (As slow as it is to begin with). On a 0.4mm nozzle, you may have to sand down the dovetail connectors (Printed with an A1 that was slightly printed out of its tolerances) I put it together by cutting and sanding a piece of clear acrylic sheet (3mm thick) to fit on top of the nest. I then marked out each hole on the acrylic and drilled them with a 3mm Drill Bit. Bought some M3 x 10mm (10mm from the bottom edge of the screw head) zinc-plated bolts from Bunnings (Australia's beloved and holy national hardware store). It prints with;A 15mm to 20mm connector for the tube hydrating chamber.A 20mm connector for expansion to other nests or vinyl tubing.3 Walls that can block off a hole temporarily or forever.These can be altered to print however many of what you want and need. Dimensions: 150 x 100 x 34mm ENJOY