Modular Multi Tape Dispenser

This is a modular, multi-tape dispenser. It allows customisation to your specific tape needs. The intent is to scale a few sections based off the sizes of the tapes used. Some items do need to be rotated for best printing (axle, alignment rail, Separator Guide), but no supports are needed for any item. Some key dimensions:Side walls - 10mm wide, 5mm wall thickness, axle sits 2.5mm into the wall. Do not scaleExpansion - 10mm wide. Scale to the width of the tapes you used.Separator Guide - 13mm wide. Print one less than the number of tapes being used. Do not scaleAxle - 10mm wide. Scale to 4mm longer than the internal width.Blade Cover - 10mm wide. Scale to 10mm longer than the internal widthAlignment Rail - 10mm wide. Scale to the internal width, or a fraction less. Print 2. Internal width (mm) = 10 + (13 * Number of Separator Guides) + (Sum of tape widths in mm) The Alignment Rail is used to help ensure proper alignment of all sections. It's not necessary if you can manually join a