Modular Necron fortification network - part 1

Another Necron-inspired terrain set.Once again, it is designed to be lit from the inside to create a strong Necron glyph glow effect. The glyphs are slightly modified versions of the patterns found on the Big Obelisk. Part 1 focuses on a small, 2-inch-high wall system with connecting towers. I wanted the terrain to be fully rearrangeable, so it is designed to use magnets both for mechanical connection and for power transfer. I plan to make part 2 in next weeks focusing on higher walls (~4 inch) and then part 3 with some smaller pieces - feel free to comment with your ideas, if I will like them I might design it. Magnets: Diameter: 4 mm Thickness: 2–4 mm - stack them in as many as needed The magnetic power connection works reliably for up to 3–4 connected sections. Beyond that, the voltage drop becomes too large to power the LEDs properly (12V PSU, Voltage after 4th connection 8V.The voltage drop is caused by the electrical resistance of the magnet-to-magnet and magnet-to-washer contact