Thingiverse
Modular Neopixel Ring Lamp
von AlbertGBarber
199
Downloads
253
Likes
0
Makes
Description
(scroll down for videos)
This is a modular lamp using Neopixel Rings (32 and 16 pixels). The shades of the lamp are interchangeable, and you can mount them in a number of different ways (see the drawing pdfs for examples). Right now I've only made a couple of shade designs, but I might post more in the future.
Printing / Assembly Instructions
For printing, print all the shade parts in clear filament, I used clear ABS, but clear PLA will work. White might also work, but I have not tested it. Everything prints without supports except the Base_top, which needs a bit for the USB door hinge.
Assembly should be straight forward, everything pretty much stacks together. Use the drawings as a guide. M3 screws are used to join the top and bottom parts of the base together. Glue is not needed except between a few parts (the caps for the classic shades, the base parts for the crystal shades, and the bolt covers for the base). Note that for the crystal shades the base p
(scroll down for videos)
This is a modular lamp using Neopixel Rings (32 and 16 pixels). The shades of the lamp are interchangeable, and you can mount them in a number of different ways (see the drawing pdfs for examples). Right now I've only made a couple of shade designs, but I might post more in the future.
Printing / Assembly Instructions
For printing, print all the shade parts in clear filament, I used clear ABS, but clear PLA will work. White might also work, but I have not tested it. Everything prints without supports except the Base_top, which needs a bit for the USB door hinge.
Assembly should be straight forward, everything pretty much stacks together. Use the drawings as a guide. M3 screws are used to join the top and bottom parts of the base together. Glue is not needed except between a few parts (the caps for the classic shades, the base parts for the crystal shades, and the bolt covers for the base). Note that for the crystal shades the base p
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
