FULLY MODULAR NESTABLE STORAGE BOXES

Here is a set of storage boxes that assemble with each other and can allow you to create an arrangement on a desk. All the boxes can be combined with each other: you just have to keep the meaning of each one Leaving the female hooks always on the same sides and the male hooks on the opposite. So, on asymmetrical elements there are several arrangements depending on whether you want to put them long or wide. If the coating underneath is not perfectly flat the boxes will nevertheless be placed well (you can see this in the photos of the workbench which is not at all flat...) Prints easily in PLA for me with classic settings. If you need a specific dimension or realize there is a size issue so don't hesitate to ask me and I will add the module you are missing (higher, smaller, longer...etc).They are all checked to be printed easily without anomalies. This model was designed on an ender 3v2 with Cura version 5.5.0 No Rafts and requires putting in supports (Gyroid for me ...) It was printed with PLA+ with 20% infill but any other material will work. the retraction is 4mm with a speed of 25mm/s. the nozzle temperature is 200°C, the plate at 60°C.