Thingiverse
Modular plant lamp
door Ksantor
49
Downloads
53
Likes
0
Makes
This is a modular system including lamp modules for plants, for now. I planned to grow it u to full 2-3 level hydroponic system. Possible in future I will use more stronger profile like 20x20 or 40x20. It powered from 220V and all lamps connected in parallel mode. All wires could be hidden into profile.
Lamp could be use as standalone (basic use) or mounting on walls or ceiling (WIP)
Materials need:
2x metal profile 10x20
4x aluminium 5mm pipes
IKEA 3000k 600lm GU10 LEDARRE
GU10 female plug
1x PSU switch
WAGO 3-pin connectors
Wires
2x M4x10 screws
Assembly instructions.
1. You could use any needed height for all construction and any length. It's modular construction. I used 1m of 10x20 and 1m of 5mm pipes to build my setup.
2. Print two top stoppers, and Table mounts.
3. Print gu-10 mount and lampmount1,2
4. GU-10 female plug could be hotglued into gu10 mount (don't forget to push wires outside
5. Nount for female plug and mount for 10x20 profile it's ball joi
Lamp could be use as standalone (basic use) or mounting on walls or ceiling (WIP)
Materials need:
2x metal profile 10x20
4x aluminium 5mm pipes
IKEA 3000k 600lm GU10 LEDARRE
GU10 female plug
1x PSU switch
WAGO 3-pin connectors
Wires
2x M4x10 screws
Assembly instructions.
1. You could use any needed height for all construction and any length. It's modular construction. I used 1m of 10x20 and 1m of 5mm pipes to build my setup.
2. Print two top stoppers, and Table mounts.
3. Print gu-10 mount and lampmount1,2
4. GU-10 female plug could be hotglued into gu10 mount (don't forget to push wires outside
5. Nount for female plug and mount for 10x20 profile it's ball joi
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!