模块化螺丝收纳盒Modular screw storage box

相信你也有很多螺丝不易翻找的烦恼，当你找不到合适的螺丝收纳盒的时候，可以尝试下这款模块化组合的收纳盒。 标准盒子内部空间大小为71*46*42mm，加大盒子内部空间大小为71*102*42mm； 每个盒子可以分为上下两层，以放置较小的螺丝或者零件； 标准盒子的大小可以放入4颗18650电池； 每个盒子前面可以装入打印版标签，以方便区分收纳物品，也可以使用手写标签； 每个小盒子组合后配合紧密，并设计有限位； 另外设计有提手可以方便移动收纳盒。 I believe you also have a lot of troubles that screws are not easy to find, when you can't find a suitable screw storage box, you can try this modular combination of storage boxes. The size of the internal space of the standard box is 71*46*42mm, and the size of the internal space of the enlarged box is 71*102*42mm; Each box can be divided into two layers, upper and lower, to place smaller screws or parts; The size of the standard box can fit 4 18650 batteries; A printed label can be placed on the front of each box to make it easy to distinguish the stored items, or a handwritten label can be used; Each small box is tightly matched after combination, and the design is limited; In addition, it is designed with a handle to make it easy to move the storage box.   所有打印件无需支撑，材料可选PLA、PETG或者ABS； 需要五金： 标准盒子5*2mm磁铁*3；加大盒子5*2mm磁铁*4 提手需要4颗最短M4*10最长M4*16的CM超薄扁平C头内六角螺丝，如下图所示 All prints do not need to be supported, and the material can be PLA, PETG or ABS; Hardware required: Standard case 5*2mm magnet*3, enlarge case 5*2mm magnet*4 The handle requires 4 CM ultra-thin flat C-head hexagon screws with the shortest M4*10 and longest M4*16, as shown in the figure below