Thingiverse
Modular Spiral Egg Tower
door glafebe6
45
Downloads
301
Likes
1
Makes
Stores about 24 eggs in the depicted version with 2 segments taking advantage of vertical space.
Description:
I made this model for my Wife and wanted to have a modular solution that saves some space and looks nice too.
Printing instructions:
no supports
PLA
25% infil
3 walls and
1.2 mm top and bottom thickness
.2 layer height with .4mm nozzle at 200C
bed 60C
adhesion brim
after printing insert 8x3 mm Neodymium disk magnets
designed with a slight interference but recommend using some super glue for good measure.
i flipped the polarity at one position compared to the other 2 so that it only fits in the proper orientation. However, that's not necessary.
magnets used:
https://www.amazon.com/dp/B0CDGYTLH6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_8&th=1
Updated:
added 1/2 and 1/4 spiral segments for more options
Description:
I made this model for my Wife and wanted to have a modular solution that saves some space and looks nice too.
Printing instructions:
no supports
PLA
25% infil
3 walls and
1.2 mm top and bottom thickness
.2 layer height with .4mm nozzle at 200C
bed 60C
adhesion brim
after printing insert 8x3 mm Neodymium disk magnets
designed with a slight interference but recommend using some super glue for good measure.
i flipped the polarity at one position compared to the other 2 so that it only fits in the proper orientation. However, that's not necessary.
magnets used:
https://www.amazon.com/dp/B0CDGYTLH6?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_8&th=1
Updated:
added 1/2 and 1/4 spiral segments for more options
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
