Modular tool tray for Kobra S1 Max D3P riser

This is a modular tool tray for use with the Kobra S1 Max D3P riser - Link: 🧞‍♂️ Anycubic Kobra S1 Max D3P riser・ 3MF File for 3D printing・Cults The model features a tool tray that can mount on either side of the Kobra S1 Max D3P riser using the included hooks. A right and a left set of hooks are provided. Left and right are reference as your left or right when looking at and facing the front of the printer. The tool tray features a main tray with inner compartments allowing up to 3 compartments or one large and one smaller compartments. You can attach various components to the tool tray using the dovetails attachments on the main tray. The following components are included: * A deeper container that can be used to hold hair spray cannister for build plate adhesion; * A hex tool holder; * A cutter holder; * A side tray for storing various items; * A scraper holder. You can use the same containers multiple times as all are modular. This is a great way to have the tool tray and storage you want. 3D PRINTING PRINT SETTINGS IMPORTANT I upload a print setting files for all my models. The print settings has the parts positioned for correct printing with support painted. I strongly recommended you use my print setting file. If not, I will not be able to assist you if there is an issue when printing. From experience, many of the issues with printing my models are on account of users not using my print settings. 3D PRINT SETTINGS I use the following settings and materials to print this model: Infill % : 15% (no need for more) Nozzle diameter: 0.4 mm Layer height: 0.2 mm standard Walls: The model is set for 2 walls. Some users have reported better rigidity with 3 walls. Material: The Anycubic Kobra S1 Max has an internal heater. PETG is the preferred choice for filament as it is about the same price as PLA but will sustain higher temps without deforming. You can also print the riser using ASA or ABS but this is more challenging due to possibility of warping. If you will only