Slicer Discord
Modular Window Exhaust System V2 – Modello 3D stampabile da MakerWorld MakerWorld
3D Printer Accessories

Modular Window Exhaust System V2

1.6k Download
709 Likes
891 Makes
Vai al Modello
Designed these parts to hold my window open and attach a 4 inch exhaust hose from my P1S. This fit my window, however please test fit the 15mm wide prop before printing larger pieces for your own to verify fitment. -Fits window thickness of 32mm and any length. -Print all parts besides the pins on the flat side surfaces. -3 walls at 5% infill is recommended to conserve filament. -Left and right end pieces have a wider flat end for better seal. -Left end piece is meant to be used with this magnetic hose adapter. Attach with JB Weld or double sided tape: https://makerworld.com/en/models/374008#profileId-273985 If unsure and want to test if this will fit your windows thickness, I would recommend printing the 15mm wide model first. If it fits, measure the width of your window and print the appropriate parts needed. Every part connects with 2 printed pins and is recommended to be permanently bonded with adhesive or tape for a better seal.
Categoria
3D Printer Accessories
Fonte
MakerWorld
Pubblicato
Aggiornato
Cosa serve per stampare: Avanzato Bassa affidabilità
Supporti 1/3
Assemblaggio 2/3
Impostazioni 1/3
Dimensioni piano 0/3
Post-lavorazione 1/3
Stampante
FDM / FFF
Formato file
STL
Materiale
Piano min.
50 mm (Piccolo)
Post-elaborazione
Incollaggio
Software
Cura, PrusaSlicer o simile
Ancora nessuna valutazione
Ancora nessun commento – sii il primo!

Modelli simili

6 Suggerimenti
Feed Blog Slicer Calcolatore Ricerca per immagine Invia Contatto Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Aggiungi alla collezione