Thingiverse
Molex78802_Module
by bkw
6
Downloads
5
Likes
0
Makes
This carrier comes in two styles to hold either a DIP chip or a small PCB, in 3 sizes each for 24, 28, or 32 pins, and fits into the Molex 78805 socket found in some vinatge computers and industrial applications. There are a few different PCBs that fit in this carrier currently, and a blank pcb template for designing new pcbs.
This part needs to be both dimensionally accurate and mechanically strong, and so it's generally not possible to print at home with SLA or FDM. The only good results I've had are with SLS, which you have to order from services like Shapeways, Sculpteo, CraftCloud, etc.
MJF is fine for the DIP versions but not accurate enough for the PCB versions. The extra high resolution 60um SLS from some services is not required. The cheapest standard plain white SLS is perfect. Adding color dye finishing options is ok. Sculpteo's grey (mixed black & white powder) PA12 SLS is excellent.
Print orientation matters for the PCB versions. The part must be printed in the sa
This part needs to be both dimensionally accurate and mechanically strong, and so it's generally not possible to print at home with SLA or FDM. The only good results I've had are with SLS, which you have to order from services like Shapeways, Sculpteo, CraftCloud, etc.
MJF is fine for the DIP versions but not accurate enough for the PCB versions. The extra high resolution 60um SLS from some services is not required. The cheapest standard plain white SLS is perfect. Adding color dye finishing options is ok. Sculpteo's grey (mixed black & white powder) PA12 SLS is excellent.
Print orientation matters for the PCB versions. The part must be printed in the sa
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!