MOLLE Tie Down (Embedded Print)

Featured here is a small hook you can embed an elastic such as a hair tie inside to allow you to easily strap cables to MOLLE or any strap for cable management.
I recommend you print with a 0.2mm nozzle for best results because this is a very small part. The hole for the elastic is 3mm in diameter, simply pause your print before the hole is closed and place the elastic inside before resuming the print.
If you have a different sized elastic, scale this accordingly and make the hole at least 0.5mm wider than the elastic to ensure it doesn't get melted by the nozzle: Example, a 5.5mm thick elastic will need the part scaled to 200%