MakerWorld
Electronics
Go to Model
Monitor Arm 3d printed
1.1k
Downloads
454
Likes
137
Makes
OverviewI designed a monitor stand for my secondary screen because I didn’t want to spend €30 on a commercial one. This model is easy to assemble and sturdy enough for everyday use.Required MaterialsA rigid tube with a diameter of around 35 mm from a classic arm stand like this :M5 screws (any length, optional but recommended for rigidity)Five M3×25 mm screws (three are enough in my case) with nutsTwo M6 screws for the baseAll the printed parts (see the model’s page for the full list)Assembly StepsSlide the "Arm 1" part onto the tube.Insert “Pied de liaison Part 1”(Optional) Add M5 screws to increase stability using the designated holes.Attach the "Arm 2" part, which holds the VESA plate.Secure the 100×100 VESA plate using M3×25 mm screws.Insert the "Pied de liaison Part 2" to fill the gap in the hinge.<img c
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
