Monitor Extension VESA Mount using Original Stand

This simple print allows you to increase the mounting height of a monitor that uses the VESA mounting system without changing the footprint or original stand. The included print profiles are examples only. They are based on a 100mm x 100mm VESA mount with an 80mm height increase (rise) from the original height. The STL/CAD download section contains a Fusion 360 file that can be used to change the parameters/sizing for each part of the adapter. The settings that can be changed:The bottom two entries indicate the final size of the adapter (so you can make sure it will fit onto your print bed).Advantageseasily change any dimension (using Fusion 360 - change parameters)up to 120mm rise for single bracket when using 100x100 VESA on 250mm build plate (more if 75x75 VESA)can stack more than one to increase heightcan use heat inserts or self tapping screws for attaching the base onto the adapterretains original standExamplesThe following images show the effect using a 3mm hole for self tapping