Thingiverse
Monitor mount 100mm
door SiltasKepas
0
Downloads
0
Likes
0
Makes
Hi!
Adding PC monitor mount for 100*100 mounting plate monitors.
Low profile. (8mm)
Made for bigger (6-8 mm) screws (like concrete or aerated concrete screws.
or some 5-6mm wooden ones.
Distance between screws - 50 mm (centers)
Printed with 101% shrinkage compensation. (scaling). But part itself has no pre-scaling.
height adjustment - tighter screw = higher side / more loose screw - lover side
(not sure will it work with wooden screws or not.)
For lightweight screens, don't blame me if your will fall down!!!
UPDATE: Using for 4 months. works great.
Adding PC monitor mount for 100*100 mounting plate monitors.
Low profile. (8mm)
Made for bigger (6-8 mm) screws (like concrete or aerated concrete screws.
or some 5-6mm wooden ones.
Distance between screws - 50 mm (centers)
Printed with 101% shrinkage compensation. (scaling). But part itself has no pre-scaling.
height adjustment - tighter screw = higher side / more loose screw - lover side
(not sure will it work with wooden screws or not.)
For lightweight screens, don't blame me if your will fall down!!!
UPDATE: Using for 4 months. works great.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
