Monitor pole mic arm

I made this adjustable mic arm to clamp onto my monitor's mounting pole and allow me to pull my mic out when I'm using it and push it out of the way when I'm not. I've provided mounts for 35mm and 32mm poles (hopefully fits most monitor poles) and it will fit any mic that uses the standard 5/8" mic screw. Each hinge has adjustable tension so it will all stay where you put it.

### What you'll need:
608 Bearings - x4
M3 Screws - x10
M3 Nuts - x4

### Assembly

Print 1 of each part and begin by inserting the 4 bearings into their slots on the front pole mount and arm 1. They might take some pressure to get in but you shouldn't need a press or anything crazy.

Next press the axles on arm 1 (the bigger arm) into the bearings on the pole mount. Put friction pad 1 on the bottom and put 2 M3 screws through the holes on it. 1 screw goes through into the hole in the axle and the other screw goes in the hole in the arm. Put another M3 screw through the top of the axle. Even though it doesn't h