Slicer Discord
Monkey D Luffy - HueForge – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

Monkey D Luffy - HueForge

22 Downloads
18 Likes
17 Makes
Model downloaden
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130x170mm in size Filaments Used:PLA Black PLA BambuLab Basic Red PLA BambuLab Basic Yellow PLA WhiteThis print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #11 (0.96mm) swap to RedAt layer #16 (1.36mm) swap to YellowAt layer #23 (1.92mm) swap to White for the rest. Frame Version:At layer #28 (2.32mm) swap to Yellow for the rest. If you'd like to see my other anime-themed HueForge projects For those who don't have an AMS or only have one, and the project uses more than four colors, you just need to replace the color changes with pauses and switch the filament manually. If you wish to enlarge this project, you can freely scale the X and Y axes. However, it is crucial to keep the Z height at 100% (do not change it). This ensures that the filament color swaps remain at the correct layers; changing the height will break the color sequence and ruin the final result. Pleas
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Gemiddelde betrouwbaarheid
Waarom?
2 kleuren
Eendelig 2 kleuren / AMS
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Min. bedgrootte
170 mm (Gemiddeld)
Kleuren
2 (AMS/MMU aanbevolen)
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie