Monochrome M8

AMS not required, manual swaps work great with this print, although an AMS is helpful with Filament Painting projects **You can customize the colors of the car with this design. In your slicer when you swap to Blue, use any color you'd like, and only the car color will change. ** This picture was hand drawn and printed using HueForge. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA BambuLab Basic Jade White Transmission Distance: 5.7This print uses 2 unique filaments Swap Instructions: Start with Charcoal Black At layer #16 (1.36mm) swap to Jade White for the rest.