Mononoke

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Jade WhiteAt layer #15 (1.28mm) swap to BlackAt layer #16 (1.36mm) swap to RedAt laye