MonoPi 3B+ Case

Updates:
30/04/2020(3)
Uploaded a Type2 version for anyone having trouble printing the other flat on the bed. You need to print both top and bottom for the Type 2 design. These parts are not interchangeable with the original style.

30/04/2020(2)
Uploaded a V2 of the top that allows the use of a fan and access to the Pi header.
I have not tested this as I do not use a fan on mine.
I designed this for the fan to sit on the outside as the space inside is tight. You should be able to fit any 30mm fan and screw into the plastic of the top to fasten using M3 machine screws.

30/04/2020
Uploaded a V2 for the base for anyone who might want a more ventilated case.

Summary:
I thought I would try and design a Raspberry Pi case that could be easily printed on the MPMD bed. I was going to make the parts sit vertically but found that it was possible to print lying flat on my bed. I ended up designing it so that the bottom can be printed vertically or horizontally and the top can be pr