Monoprice Mini Delta E3d Clone mount

https://www.thingiverse.com/thing:3717404 Newer version. with version 3 coming online in minutes.


I bought an E3d V6 clone from amazon and all the mounts that were out there for the MPMD didnt work I tried two different ones. The heater block on the e3d is larger than the one on the MP Mini Delta so it melted the holder and had to sit on the effector plate. The other issue is people were designing them with the two front screws as a center reference when if you look at the MPMD stock hotend the center line is back approx 5-7 mm from the screw position. So I used the stock mount as a ref and used fusion 360 and this is the result.

5/24/2019 1345 Added quick photo of Version 2 workup from this morning. Making the holes larger to fit the nuts that come with the machine. Opened up the backend some, added fan holder as the one that mounts to the heatsink on the hotend is warping. Version one got about 8 hours and it now starting to loosen on the screws (hence working on getting the