Monoprice Mini Delta V1 Initial/Basic Gcode Calibration

I recently added a basic troubleshooting section to the bottom of this page. If you have a problem with this machine that is easily solved, then it should be covered there. FOR EXAMPLE, IF YOU ARE ON CURA 4.5, YOU NEED TO TURN THE BED TEMPERATURE DOWN (IN CURA) IN ORDER FOR ANYTHING TO PRINT ON YOUR STOCK PRINTER.

Basically, the stock MPMD V1 cannot be reliably calibrated via true delta calibration until something is done to address the wobbly bed leveling system. If it is your only 3D printer, then you first need to get it to where it can print at least somewhat accurately in order to print the recommended upgrade parts. Only then, should you fully calibrate your MPMD V1.

Full MPMD V1 Calibration Guide and FAQ:
https://www.reddit.com/r/mpminidelta/comments/bzm1s2/updated_mpmd_calibration_guide_and_faq/

20mm Hexagon Goals:
1. Get people new to delta 3D printing used to the idea that calibration hexagons are more meaningful than calibration cubes in this context due to de