Monoprice Mini Delta V2 Springy fan bracket

Springy Fan bracket for MPMD V2.

I bought new fans (Sunon MF40101V2-1000U-A99 for inside and MF30101v2-1000U-A99 for hot end) for my MPMD v2 but the internal one was still making a lot of noise, figured out it was making the plate it was mounted to vibrate. This bracket have springs to absorb the vibrations and works quite well in my experience.

You might not feel like you need new fans as badly if you install this, but for me both original fans some times go in to an unbalanced state where they make a lot of noise so for me it's still worth it at least.

You need 2x M3 16mm cap head hex bolts and 2x M3 nyloc nuts.

If you replace the fan you either need crimp tools for JST-XH or cut and splice the wires.
To reach the fan connector you need to unscrew the two screws on the top side of the display panel (you should already have removed the bottom ones), then you should be able to pull it out a little bit, unplug the power cable next to the fan connector and you should be abl