Monster Warrior #04

If you're interested in the commercial use of my models, earlier access, exclusive designs or if you simply like my work and want to support me, please check out my Patreon at https://patreon.com/29flo and subscribe to a membership tier that suits you.  These photos are REAL PHOTOS of a FDM and RESIN printed figurines. Also there are RENDERS from Blender (not AI-generated images) and show an actual 3D model of the figure with all its details. It depends only on you, your printer (FDM or SLA), and the print settings themselves how detailed the final - 3D Printed model - will be. If you want to print it with an FDM printer, I suggest printing it at least 15–20 cm high. [ Suggested Print FDM Setup for 15-20cm figurine ] Nozzle: 0.4mm Layer Height: 0.15-0.2mm Infill: 10-25% Wall loops: 2-3 Supports: Tree (auto) Print with fuzzy skin effect: - Fuzzy Skin: Contour - Fuzzy Skin Point Distance: 0.1 - Fuzzy Skin thickness: 0.1   As always! The key to printing my figurines is having good adhesion to the build plate. I use CryoGrip Pro Frostbite for printing, which provides excellent grip, ensuring that every figurine prints successfully every time. I mainly use filaments from Bambu and have no issues with them either. If you have a different setup, make sure to focus on build plate adhesion, use high-quality dry filament, and everything should be fine.