Monstera Bookmark

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm The Model is 49.95x152.4mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 1.7mm Filaments Used: PLA+ Numakers Pitch Black Transmission Distance: 1.6 PLA+ Esun Pine Green Transmission Distance: 1.2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA+ Numakers Pure White Transmission Distance: 4.8This print uses 4 unique filaments Swap Instructions: Start with Pitch Black At layer #7 (0.64mm) swap to Pine Green At layer #11 (0.96mm) swap to Yellow At layer #14 (1.2mm) swap to Pure White for the rest.